At the start of an ABM project, the sales team often gives us a list of 300 or 400 companies. It usually includes the big names in the sector, a few lost clients, prospects met at trade shows, and the companies the CEO dreams of signing. With only two or three salespeople, this volume is impossible to manage effectively. In our ABM agency, we almost always start by narrowing this list down to about a hundred target accounts, chosen using written criteria validated by the sales team. Here is how we do it, step by step.

Key takeaways

  • The size of an ABM list should be based on the actual time available to your sales team, which often results in around a hundred accounts.
  • The profile you are looking for should be built based on your best current customers.
  • Each account is scored on four criteria: fit, potential, intent signals, and access to decision-makers.
  • Accounts are divided into three tiers, with a different level of effort for each.
  • The list is reviewed quarterly with the sales team, following pre-established entry and exit rules.

Why limit the list to around a hundred accounts?

ABM (Account-Based Marketing) involves focusing marketing and sales efforts on a specific list of companies, with messages tailored to each one. This work takes time: researching the company, identifying decision-makers, preparing content, following up, and securing meetings.

To determine the size of the list, we start with the time available to the sales team. How many accounts can each person realistically manage over a quarter, in addition to their current deals? We then multiply that by the number of salespeople. For a team of two to four people, we generally arrive at around a hundred accounts, with a small portion being monitored very closely.

With a much longer list, salespeople no longer have the time to personalize their approach, and the project ends up looking like standard prospecting.

Step 1: Start with your best customers

Before looking for new accounts, look at who is already buying from you and under what conditions. For your 20 to 30 best clients, note:

  • revenue and margins achieved;
  • sales cycle length;
  • sector, size, and geographic area;
  • job titles of the decision-makers and signatories;
  • the trigger event for the purchase (new website, regulations, management change, fundraising);
  • length of the relationship.

The commonalities among these clients form your ICP (Ideal Customer Profile), the company profile most likely to buy and stay. It serves as a filter for all subsequent steps.

Step 2: build the initial list

Based on your ICP, gather a broad list of a few hundred to a thousand accounts. We typically use:

  • the CRM: old leads, lost opportunities, inactive clients;
  • LinkedIn Sales Navigator, filtered by sector, size, and area;
  • company databases and professional industry directories;
  • accounts mentioned by sales reps and partners.

Deduplicate everything in the CRM before scoring to prevent the same company from appearing under multiple names.

Step 3: score each account based on four criteria

We score each account out of 100 points using a scoring grid with four criteria. The weightings below are a starting point, to be adapted to your business.

Criterion Weight What we look at
ICP fit 30 points Industry, company size, region, organisation, tools in use
Potential 30 points Possible revenue, number of sites or teams, upsell opportunities
Intent signals 25 points Hiring, fundraising, new site opening, new executive, visits to your website
Access to decision-makers 15 points Contacts already known, mutual connections, similar customer in the group or industry

Alignment with your ideal customer profile

An important account that falls outside your core target rarely converts. Rate each ICP element from 0 to 5, then calculate the total out of 30 points.

Potential

Estimate the potential revenue over two or three years. A company with ten locations or several subsidiaries may be worth more than a larger account that will only make a one-time purchase.

Intent signals

TheIntent signals indicate that an account might be ready to buy in the coming months: hiring for roles related to your offering, fundraising, opening a new site, a new director joining, or repeated visits to your pricing or case study pages. These scores fluctuate the most from one quarter to the next.

Access to decision-makers

An account where you already know two people, or that resembles a satisfied customer, will be easier to open. This criterion carries less weight than the others, but it helps break ties between similar accounts.

A scoring example

Here are three fictional accounts, scored using the grid:

Account Fit (/30) Potential (/30) Intent (/25) Access (/15) Total
Logistics company, 12 warehouses, new head of operations 27 26 20 9 82
Large industrial group, outside the priority sector 12 28 5 6 51
Core-target SME, single site, no signal 25 10 3 12 50

The large corporation, which sales teams would likely have put at the top of the list, ends up behind the logistics company. Its potential is high, but it falls outside the core target and shows no buying signals.

Step 4: Divide accounts into three tiers

Once the accounts are ranked, keep the top 100 and divide them into tiers. Marketing and sales efforts vary depending on the tier.

Tier Number of accounts Approach Typical actions
Tier 1 10 to 20 One-to-one Account plan, content written for the company, personal messages to each decision-maker, dedicated event or meeting
Tier 2 30 to 40 One-to-few Content by industry or by business issue, LinkedIn Ads on an account list, sequences adapted by role
Tier 3 40 to 60 One-to-many Ads targeted at the list, general industry content, signal tracking to move an account up a tier

Tier 1 accounts receive a one-to-one : one plan per account, shared between marketing and sales, and the bulk of the sales representative's time. For Tier 2, we group accounts by sector and run LinkedIn campaigns on the list, just as we do for securing qualified meetings with industrial companies. Tier 3 accounts remain under monitoring and move up a level as soon as a signal appears.

Step 5: get the list validated by the sales team

Sales reps will follow the list if they have participated in its creation. Schedule a review session with each one:

  • they verify the accounts they know (ongoing project, disgruntled contact, competitor already established);
  • they can propose adding an account, provided it is scored using the same grid;
  • you decide together who will handle each Tier 1 and Tier 2 account.

Then, record the score, tier, and the responsible sales rep for each account in the CRM.

Step 6: review the list every quarter

In three months, some companies sign, others never respond, and new signals appear. The quarterly review is used to keep the list up to date. Set in advance:

  • exit rules: account signed, no engagement after two quarters, project awarded to a competitor;
  • entry rules: new strong signal, new comparable client in the same sector;
  • a maximum number of changes per quarter, to allow time for actions to produce results.

The Toyota Material Handling case: ABM in the service of the pipeline

Toyota Material Handling France, the French subsidiary of a material handling equipment manufacturer, entrusted us with its acquisition in August 2025. Its clients are industrial companies, logistics providers, and major accounts, with long sales cycles and multiple decision-makers per deal.

We first overhauled the HubSpot CRM, then implemented a multi-channel acquisition strategy: an ABM approach for strategic accounts, LinkedIn Document Ads and video campaigns tailored by profession and sector, Google Ads, Bing Ads, and nurturing scenarios in HubSpot. Each campaign is tracked through to the SQL stage.

In the first quarter of 2026, the company recorded:

  • 521 leads and 320 MQLs;
  • €2.8M inpipelinesales pipeline;
  • a cost per lead of €71 on LinkedIn Ads.

What mistakes should you avoid when selecting accounts?

  • Choosing accounts based on brand awareness rather than their fit with your ICP.
  • Keeping 300 accounts "just in case" without having the necessary sales capacity.
  • Building the list without involving the sales team, or letting them add to it without tracking the added accounts.
  • Never removing an account that doesn't respond.
  • Forgetting to record the score and tier in the CRM, which prevents you from comparing results by level.

Which metrics should you track?

  • The percentage of targeted accounts with at least one engaged contact (visit, response, meeting).
  • The number of meetings and opportunities per tier.
  • The pipeline generated from the list and its conversion into contracts.
  • The sales cycle length for ABM accounts compared to your other opportunities.

These figures are also used to adjust advertising spend for the list. On LinkedIn, we align the budget with contract value and sales cycle length, then we distribute it across the tiers.

The answers to your questions

How many accounts should you target in ABM?

How do you define your Ideal Customer Profile (ICP)?

Which intent signals should you use in ABM?

What is the difference between tiers 1, 2, and 3?

How often should you review the ABM account list?